Care Instructions
Keep Your DROP17 Gear Looking Fresh
Your DROP17 hoodie is built to last—350gsm heavy-loop fleece, pre-shrunk, and engineered for durability. Follow these care instructions to keep it looking and feeling brand new, drop after drop.
Washing Instructions
Before First Wear
Wash before wearing. Even though our hoodies are pre-shrunk, washing removes any residual dye or manufacturing residue and ensures optimal softness.
Machine Wash
-
Temperature: Cold water (30°C / 86°F or below)
-
Cycle: Gentle or normal cycle
-
Detergent: Mild liquid detergent (avoid bleach or harsh chemicals)
-
Load Size: Wash with similar colors; avoid overloading the machine
Turn Inside Out
Always turn your hoodie inside out before washing to protect the exterior fabric, graphics, and numbered tag from friction and fading.
Avoid Bleach
Never use bleach or fabric softeners. Bleach damages the fibers and fades the Cincinnati Heat Orange colorway. Fabric softeners reduce the fleece's natural breathability.
Drying Instructions
Air Dry (Recommended)
For best results, hang or lay flat to air dry. This preserves the fabric's structure, prevents shrinkage, and extends the life of your hoodie.
-
Hang on a sturdy hanger or drying rack
-
Avoid direct sunlight (can fade colors over time)
-
Allow 6–12 hours for full drying
Tumble Dry (If Needed)
If you must use a dryer:
-
Heat Setting: Low heat only
-
Time: Remove promptly to avoid over-drying
-
Dryer Balls: Use wool dryer balls to maintain fluffiness (optional)
Note: Repeated high-heat drying can cause minimal shrinkage (1–2%) and reduce fabric softness over time. Air drying is always best.
Ironing & Steaming
Ironing
-
Heat Setting: Low to medium heat
-
Method: Iron inside out to protect graphics and fabric
-
Steam: Use steam if needed for stubborn wrinkles
-
Avoid: Do not iron directly over printed graphics or numbered tags
Steaming (Preferred)
A handheld steamer is the safest way to remove wrinkles without risking heat damage. Hold the steamer 1–2 inches away from the fabric.
Stain Removal
Treat Stains Immediately
The faster you treat a stain, the easier it is to remove.
Spot Cleaning
-
Blot (don't rub) the stain with a clean, damp cloth
-
Apply a small amount of mild detergent or stain remover
-
Gently work the solution into the fabric with your fingers or a soft brush
-
Rinse with cold water and blot dry
-
Wash as normal
Stubborn Stains
For oil-based or set-in stains, pre-treat with a stain remover before washing. Avoid harsh scrubbing, which can damage the fleece fibers.
Storage Tips
Hang or Fold
-
Hanging: Use a sturdy hanger to maintain shape (avoid wire hangers)
-
Folding: Fold neatly and store in a cool, dry place
Avoid Compression
Don't store your hoodie in tightly packed spaces for extended periods. Compression can flatten the fleece and affect its structure.
Keep Away From
-
Direct sunlight (fades colors)
-
Damp or humid environments (promotes mildew)
-
Moths and pests (use cedar blocks or lavender sachets if needed)
What to Avoid
❌ Don't Use Bleach
Bleach weakens fibers and destroys the Cincinnati Heat Orange colorway.
❌ Don't Use Fabric Softener
Fabric softener coats the fleece fibers, reducing breathability and moisture-wicking properties.
❌ Don't Dry Clean
Dry cleaning chemicals can damage the fleece and printed graphics. Stick to machine washing.
❌ Don't Wring or Twist
Wringing can stretch and distort the fabric. Gently squeeze out excess water or roll in a towel instead.
❌ Don't Over-Wash
Washing after every wear isn't necessary. Spot clean minor stains and air out your hoodie between wears to extend its life.
Pilling & Fabric Care
What is Pilling?
Pilling (small fabric balls) can occur naturally with fleece over time due to friction. It's not a defect—it's normal wear.
How to Remove Pills
-
Use a fabric shaver or lint remover
-
Gently pull pills off by hand (avoid pulling too hard)
-
Wash inside out to reduce friction
Prevent Pilling
-
Wash with similar fabrics (avoid rough materials like denim or velcro)
-
Turn inside out before washing
-
Avoid over-washing
Numbered Tag Care
Your numbered tag is part of what makes your DROP17 hoodie exclusive. Handle it with care:
-
Avoid excessive pulling or tugging
-
Don't iron directly over the tag
-
Turn inside out when washing to protect the tag from friction
If your numbered tag becomes damaged or detached, contact us at Help.drop17@gmail.com—we'll work with you to verify authenticity and explore options.
General Maintenance Tips
Refresh Between Wears
-
Hang your hoodie in a well-ventilated area after wearing
-
Use a fabric refresher spray (optional) to eliminate odors
-
Spot clean minor stains instead of washing the entire garment
Rotate Your Wardrobe
If you own multiple DROP17 pieces, rotate them to reduce wear on any single item.
Repair, Don't Replace
Small issues like loose threads or minor seams can often be repaired. Contact us at Help.drop17@gmail.com if you need help with repairs or warranty claims.
Warranty & Defects
DROP17 hoodies are built to last, but if you experience a manufacturing defect (loose stitching, fabric flaws, etc.), contact us within 30 days of purchase at Help.drop17@gmail.com.
We'll assess the issue and offer a replacement or refund if the defect is covered under our warranty.
Normal wear and tear (fading, pilling, shrinkage from improper care) is not covered.
Questions?
Need help with care instructions or have a product issue? Contact us:
Email: Help.drop17@gmail.comInstagram: @Drop17_ig Business Hours: Monday–Friday, 10am–6pm EST
DROP17 – Built to move. Designed to show.
Take care of your gear, and it'll take care of you.